Application:
- 2005-2022 Mustangs
- (DOES NOT FIT A 2016-2020 GT350/GT350R or 2020/2022 GT500)
- NOT A REPLACEMENT FOR THE ORIGINAL VENOM WHEEL
The all new Venom 2.0 is a continuation of its predecessor the Venom wheel. With slight colors changes and some cleaned up to the styling lines breathes new life into the Venom wheels. The Venom 2.0 is still manufactured exclusively for Shelby American. It is important to note that the Venom 2.0 does NOT match the Original Venom Wheel, So if you are looking to replacement Venom Wheel you would need to replace them all. The wheel are manufactured using a flow-formed technology making it lighter and stronger to an equivalent wheel.
Flow formed wheels also increase shock load resistance, and offer increased flex tolerances verses a cast manufactured wheel. The primary difference between a cast and flow-formed wheel is the thickness of the wheel barrel. The flow forming process increases the strength of the aluminum allowing the barrel to be produced much thinner and lighter than a conventional cast aluminum wheel.
Venom Wheel sizes.
FRONT: 20"x9.5" (24.5 lbs)
REAR: 20"x10.5” (24.7 lbs)
Available in black powder coat, anthracite (darker gray), and silver colors.
OFFSETS
Wheel Size
|
|
Front Space
|
Back Space
|
Overall Width
|
Calculated OFFSET
|
20 x 9.5
|
|
4.11
|
6.35
|
10.44
|
29
|
20 x 10.5
|
|
3.68
|
7.76
|
11.43
|
52
|
Note: Purchase of aftermarket lug nuts required. The stock lug nuts will not work.
DUE TO THE MANY BRAKE PACKAGES AND CONFIGURATIONS, THESE WHEELS MAY NOT CLEAR THE CALIPERS IF YOU HAVE AN EXTREME AFTERMARKET/PERFORMANCE BRAKE SYSTEM AND/OR MAY REQUIRE WHEEL SPACERS. IT IS ULTIMATELY THE RESPONSIBILITY OF THE INSTALLER TO INSURE PROPER CLEARANCE TO THE BRAKING SYSTEM, SUSPENSION, AND WHEEL WELLS, AND THAT THE WHEEL DOES NOT CAUSE DAMAGE TO THESE COMPONENTS (OR ANY COMPONENTS) OR THE WHEEL ITSELF.
